An embossed aluminijasta pločevina plate is a type of aluminum that has a decorative pattern, such as a stucco or diamond (checker) pattern, pressed onto its surface during manufacturing.
This process can improve properties like scratch resistance, rigidity, and anti-slip performance, and it is used in applications ranging from architectural and construction to automotive and appliance manufacturing.
Embossed aluminum sheet can form a dense oxide film that provides good corrosion resistance, which can be further enhanced with coatings. Different aluminum series, like 1000, 3000, and 5000, are chosen for specific corrosion and strength requirements.
A stucco embossed finish is achieved by processing the natural mill finish material through embossing rollers. This provides a surface, which diffuses light reducing reflectivity and glare. It is used for applications on decorative effects, or to reduce surface reflectivily.
As Embossed aluminum sheet is both a stable and durable material, it provides excellent service as a roofing or cladding without the need of any protective coating.
Aluminiums highly reflective surface will dull to a uniform patina finish with prolonged exposure to the sun, wind and rain bome sand and dirt. Changes in appearance will be consistent along an elevation.
| ime izdelka | Aluminum Checker Plate / 1100 Stucco Emobossed Aluminum Sheet |
| Uvod | Aluminij 1100 je le ena od več običajnih aluminijevih zlitin in je mehka, nizke trdnosti in je pri min. aluminiju 99% komercialno čisti aluminij. Baker, železo, magnezij, mangan, silicij, titan, vanadij in cink sestavljajo preostale elemente. Ni ga mogoče utrditi s toplotno obdelavo in je zelo oblikovan. |
| Površinska obdelava | Reliefno, rezkano obdelano, barvno prevlečeno… |
| Temper | H12, H22, H14, H16, H18, H24, H26, itd |
| Pakiranje | Standardna izvozna lesena paleta; Teža snopa ne presega 2MT. Nalaganje: z 1x20GP lahko 1X20GP naloži približno 18MT |
| Kakovost materialov | popolnoma brez napak, kot so bela rja, oljne lise, sledi zvitkov, poškodbe robov, pregib, udrtine, luknje, prelomne črte, praske in brez navitja |
| Patten | Tekalna plast brite/diamond, reliefna štukatura, tekalna plast s petimi bari |
| Aplikacija | Večinoma uporabljeni znaki, reklamni panoji, zunanja dekoracija stavb, karoserija avtobusov, dekoracija sten visokih zgradb in tovarn, kuhinjsko korito, svetilka, listi ventilatorja, z deli elektronske, kemične opreme, deli za obdelavo pločevine, globoko vlečenje ali vrtenje votlih izdelkov, varjenje deli, izmenjevalniki toplote, zvončasta površina in disk, krožnik, kuhinjska posoda, okraski, odsevne naprave itd. |
Aluminium plate | aluminum alloy sheet | Aluminum tread plates | Aluminum coils | Aluminum Foils| Aluminium diamond plate sheet | Aluminum checker plates | Aluminium chequer plate sheet
| Kemijska analiza plošče iz aluminijeve zlitine | ||||||||||
| Zlitina | Si | Fe | Cu | Mn | Mg | Kr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | – | – | 0.05 | 0.03 | Ostanki |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | – | – | – | – | – | Ostanki |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | – | – | – | – | Ostanki |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | – | – | 0.1 | – | – | Ostanki |
| 1200 | 1 | 1 | 0.05 | 0.05 | – | – | – | 0.1 | 0.05 | Ostanki |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | – | – | – | 0.1 | – | Ostanki |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | – | 0.25 | – | Ostanki |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2–.5 | 3.0-4.0 | 0.1 | – | 0.25 | 0.1 | Ostanki |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | – | 0.1 | – | Ostanki |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | – | 0.25 | – | Ostanki |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | – | 0.2 | – | Ostanki |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | – | 0.25 | – | Ostanki |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | – | 0.1 | – | Ostanki |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | – | 0.2 | – | Ostanki |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | – | 5.7-6.7 | 0.06 | Ostanki |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | – | 5.1-6.1 | 0.2 | Ostanki |