Advanced technology
High quality

Aluminum sheet or aluminum strip coil  is used in construction material and building material. Including: roof panel, ceiling, in-wall, partition wall, shutters, window blind, gate, balcony, wall, road marking, street signs, road protecting plate, highway protecting plate, bridge carrier wall, scaffold, ship plate, etc. Aluminum sheet is used in electric machine components. Including: protective plate, protective box, capacitor box, tank of power capacitor, electrolytic condenser, variable of battery, volume shaft, loudspeaker framework, switch plate, semi-conductor radiator, magnetic disk, motor frame, fan blade, electric cooker, cooling fin, heat sink, etc. Aluminum as one of most important metals is widely used in industry and our daily life, when it comes to the aluminum alloy, the 1000 series aluminum sheet come to our mind, there are two typical aluminum sheets in 1000 series aluminum sheet alloy, which are 1050 and 1060 aluminum, these two-aluminum alloy are somewhere looks same, but they have different content. 1050 aluminum sheet and 1060 aluminum sheet are all belongs to 1000 series pure aluminum sheet, the aluminum content of them is all up to 99%, the difference is that to 1050 aluminum sheet, the content is 99.5%, while to 1060 aluminum sheet, the content is 99.6%, in other words, the aluminum content of 1060 aluminum sheet is a little higher than 1050 aluminum sheet But in general, the chemical composition and the physical property of them are similar, so they can replace each other, nowadays, 1060 aluminum sheet are used in industry application instead of 1050 aluminum sheet.

1050 aluminum strip coil are often used in daily necessities, lighting fixtures, reflectors, decorations, chemical industry containers, heat sinks, signs, electronics, lamps, nameplates, electrical appliances, stamping parts and other products.

In some occasions that require high corrosion resistance and formability, but not high requirements for strength, chemical equipment is a typical application.

Industrial pure aluminum strip coil has the general characteristics of aluminum, low density, good electrical and thermal conductivity, good corrosion resistance, good plastic processing performance, can be processed into plates, strips, foils and extruded products, etc., and can be used for gas welding, argon arc welding, spot welding.

Aluminum plate is any aluminum sheet metal thicker than foil but thinner than 6mm; it comes in many forms including diamond plate, expanded, perforated and painted aluminum sheet. Aluminum plate is any aluminum sheet metal that is thicker than 6mm

1050 is the most common standard aluminium grade. It has good mechanical properties and like all aluminium is less than a third of the mass of steel.

Alloy 1050 aluminum strip coil offers good corrosion resistance and is readily fabricated. Aluminium is an excellent conductor of heat and electricity.

1050A alloy has excellent corrosion resistance, high ductility, a moderate strength and a highly reflective finish. This grade of alloy is most suitable of use as food industrial containers, architectural flashings, cable sheathings, lamp reflectors and chemical process plant equipment.

Grade 1050A has superior anodizing properties for both decorative and technical requirements. It is also well-suited to chemical and electrolytic brightening.

1050 aluminum strip is a product in the pure aluminum series, which is similar in chemical composition and mechanical properties to 1060 series products, and is basically replaced by 1060 aluminum strip in application.

The last two Arabic numerals of the 1050 series are 50. According to the international brand naming principles, the aluminum content must reach more than 99.5% to qualify as a product. my country’s aluminum alloy technical standard (GB/T3880-2006) also clearly stipulates that the aluminum content of 1050 reaches 99.5%.

Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap.

It is the most commonly used series in conventional industries. Industrial pure aluminum has the characteristics of high plasticity, corrosion resistance, good electrical conductivity and thermal conductivity, but low strength, not strengthened by heat treatment, poor machinability, and can accept contact welding and gas welding.

Available aluminum sheet grade

1000 series:1050,1060,1070,1080,1100,1145,1200,1235, etc.

2000 series:2014,2017,2018,2024,2025,2219, 2219,2618a etc.

3000 series:3003,3004,3102,3104,3105,3005, etc.

4000 series:4032,4043, 4017, etc

5000 series: 5005,5052,5454,5754,5083,5086,5182,5082, etc.

6000 series:6061,6063,6262,6101, etc

7000 series:7072,7075,7003 etc

8000 series: 8011, etc.

Temper of aluminum sheet: O, H, W, F, T

H:H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H111, H112, H114, H116

T: T0-T651

Size of aluminum sheet

Thickness:0.2-6.0mm

Width:100-2400mm

Length:200-11000mm

Mother coil: CC or DC

Weight: About 2mt per pallet for general size

MOQ: 5ton per size

Protection: paper inter layer, white film, blue film, black-white film, micro bound film, according to your requirement.

Surface: clean and smooth, no bright speck, corrosion, oil, slotted, etc.

Standard product: GBT3880, JIS4000, EN485, ASTM-B209

Delivery time: about 30days after receiving the deposit

Payment: T/T, L/C at sight

Trading terms: FOB, CIF, CFR

Contact Us